Jumpers on the system board
To set the clock-doubling, some small switches (called jumpers) have to be reset. They are located on the motherboard, as
you see here:
You can read in the system board manual how to set them. Or you can look at the system board! In the picture below you
can see some of the printed information on the motherboard (this is an ASUS TX97 with socket7).
Here you can read which jumpers to set to select clock doubling 1, 1½, 2, 2½, 3, 3½ and 4 for 6 types of processors:
l P54C and K5
l P55C, K6 and M2 (Cyrix 6x86MX)
l M1 (Cyrix 6x86)
Last
To set the clock-doubling, some small switches (called jumpers) have to be reset. They are located on the motherboard, as
you see here:
You can read in the system board manual how to set them. Or you can look at the system board! In the picture below you
can see some of the printed information on the motherboard (this is an ASUS TX97 with socket7).
Here you can read which jumpers to set to select clock doubling 1, 1½, 2, 2½, 3, 3½ and 4 for 6 types of processors:
l P54C and K5
l P55C, K6 and M2 (Cyrix 6x86MX)
l M1 (Cyrix 6x86)
No comments:
Post a Comment